Alcatel-Lucent OmniPCX Office IP Touch 4068 User Manual

Programming your telephone
28
7
7.17
Modify the associated number
The associated number can be a phone set number, the voice mail number or the pager number.
7.18
The Tandem configuration
This configuration lets you group two sets under a single call number. Your set is then the main set and the second set, usually a
DECT set, is the secondary set. Each set has its own directory number, but the tandem number is that of the main set. When you
receive a call, the two sets ring simultaneously. When one of the sets answers, the other set stops ringing. When all the lines of
the main set are busy, the secondary (DECT) set does not ring. The secondary set can still be called by its own number, but in
this case, the tandem function will no longer be taken into account. Most of the functions are common to the two sets, for
example: forwarding, meet-me reminder, the various messages, etc., while others are specific to each set, for example: individual
directory, last number redial, out of service, set padlock, etc.
For more information regarding this configuration, contact the person in charge of your installation.
7.19
Create, modify or consult your intercom list (max. 10 numbers)
reach the 'Menu'
page
acceptance of the
programming is displayed
Enter your
personal
code
enter the new
associated
number
My parameters
My services
associated
2
6
5
3
ab c
def
jkl
m
n
o
Modify
2
6
5
3
ab c
def
jkl
m
n
o
reach the 'Menu'
page
follow instructions given on display
Settings
My services
Interphone
7.20
Installing a Bluetooth® Wireless Technology handset (matching)
- Alcatel-Lucent IP Touch 4068 Phone
Before a Bluetooth® headset can be used, it must be correctly matched to the terminal.
7.21
Use of the Bluetooth® handset (Alcatel-Lucent IP Touch 4068 Phone)
The Bluetooth® cordless handset permits the user to answer and call with complete freedom within a radius of 10 meter from
the set.
• IP Touch Bluetooth® Wireless handset
The handset has a LED and two buttons.
• Green flashing: normal operation.
•Green steady: handset charging.
• Orange flashing: battery charge low or handset outside coverage zone.
• Orange steady: malfunction.
reach the 'Menu'
page
you will hear a 3 note signal and the
LED will flash green and orange
alternately
with the handset turned off,
press the 2 Bluetooth®
handset keys at the same time
(long press)
searching for Bluetooth® equipment,
wait until the detected equipment
type and the address is displayed
select the
relevant
equipment
the 3 note audible signal indicates that the handset has
been installed correctly (the LED flashes green or orange
depending on the battery charge level)
My parameters
Set
BlueTooth
Add device
Add

Alcatel-Lucent OmniPCX Office IP Touch 4068 Specifications

General

Brand	Alcatel-Lucent
Model	OmniPCX Office IP Touch 4068
Category	Telephone
Language	English