Alcatel-Lucent OmniPCX Office IP Touch 4068 User Manual

Programming your telephone
30
7
7.17
Forward your calls to the associated number
If you have previously defined an associated number, you can forward your calls to this number.
7.18
Modify the associated number
The associated number can be a phone set number, the voice mail number or the pager number.
for forwarding when
you do not answer
for immediate
forwarding when your
line is busy
for forwarding if you
do not answer or if
you are busy
to cancel the
forwarding to
associate function
Settings
My services
Consultation
Associate servi
c
Overflow to
associate
OR
Overflow if bus
associate
OR
Ovflow busy/n
o
to assoc
OR
Deact overflow
associate
Apply
reach the 'Menu'
page
acceptance of the
programming is displayed
enter your
personal
password
enter the new
associated
number
menu
10:30
Settings
My services
Associate
2
6
5
3
ab c
def
jkl
m
n
o
Modify
2
6
5
3
ab c
def
jkl
m
n
o
7.19
The Tandem configuration
This configuration lets you group two sets under a single call number. Your set is then the main set and the second set, usually a
DECT set, is the secondary set. Each set has its own directory number, but the tandem number is that of the main set. When you
receive a call, the two sets ring simultaneously. When one of the sets answers, the other set stops ringing. When all the lines of
the main set are busy, the secondary (DECT) set does not ring. The secondary set can still be called by its own number, but in
this case, the tandem function will no longer be taken into account. Most of the functions are common to the two sets, for
example: forwarding, meet-me reminder, the various messages, etc., while others are specific to each set, for example: individual
directory, last number redial, out of service, set padlock, etc.
For more information regarding this configuration, contact the person in charge of your installation.
7.20
Create, modify or consult your intercom list (max. 10 numbers)
7.21
Installing a Bluetooth® Wireless Technology handset (matching)
- Alcatel-Lucent IP Touch 4068 Phone
Before a Bluetooth® headset can be used, it must be correctly matched to the terminal.
reach the 'Menu'
page
follow instructions given on display
menu
10:30
Settings
My services
Interphony
reach the 'Menu'
page
you will hear a 3 note signal and the
LED will flash green and orange
alternately
with the handset turned off,
press the 2 Bluetooth®
handset keys at the same time
(long press)
menu
10:30
Settings
Phone
Bluetooth
Add device

Alcatel-Lucent OmniPCX Office IP Touch 4068 Specifications

General

Brand	Alcatel-Lucent
Model	OmniPCX Office IP Touch 4068
Category	Telephone
Language	English