4.1 Maintenance
4.1.1 Replacing a Set
You can replace your digital set by connecting a set of the same family, but of a different type,
into your phone socket. This substitution can be temporary or permanent.
Replacing an analog set by another analog set, or replacing a digital set by a set of the same
type, requires no special procedure (simple hardware exchange).
Replacing or moving an IP phone can be achieved by connecting the hardware into the
network. Default parameters are configured on the phone set on connection. To retain
individual user parameters, configuration is required either on the set, or on the OMC and the
set.
4.1.1.1 Temporary Substitution
The replacement set keeps its own default functions (customized settings are not transferred).
The data not transferred are stored in the OmniPCX Office Rich Communication Edition
system until a set of the same type as the initial one is connected.
4.1.1.2 Permanent Replacement
The maximum quantity of data from the initial set is transferred to the replacement. Data not
transferred are deleted.
4.1.1.3 Characteristics Preserved During Temporary or Permanent set Substitution
- Rights (restricted features)
! "#$ ! % $& !
17/62
To Next Page
Need help?
General
