Quick start GuiDE - compact 3010
GB
In standby, the functions which are activated in the
boiler are shown, and there is no background lighting
in the display. The control panel automatically goes to
standby from the on position after two minutes if no
buttons are pushed or if you step to standby (left of
On/Off) with the arrow keys.
Start the on position by pressing any button.
The background lighting comes on (blue light) and
a function that can be set ashes. Select a function
that can be set with the arrow keys. The settings are
automatically saved.
1. The standby and on-position of the control panel
6. Heating with gas
7. Heating with electricity
8. Circulation pump
9. 230V connectiong
10. Temperature
11. Resetting the system
1. The standby and on-position of the
control panel
2. Start the heater
3. Switch off the heater
4. Set the temperature you want in
the vehicle
5. Warm water
Working with the lower menu row, see operating/installation instruction
for Compact 3010
2. Start the heater
1 Press the button with the arrow
until “Off” (main breaker) in the
display ashes.
2 Press the +/On button.“On”
(main breaker) in the display
ashes.
3 The settings are ready.“On”
(main breaker) is shown in the
display when the panel returns to
standby.
Start the heating in the caravan with the settings last
used.
If you break the power to the heater, the settings which
were last used will automatically be used when the
power comes back on.
ashes
ashes
To Next Page
Need help?
General
