Need help?Do you have a question about the Alfano M4 and is the answer not in the manual?
General| GPS | Yes |
|---|---|
| Data Logging | Yes |
| Connectivity | USB, Bluetooth |
| Power Supply | Rechargeable lithium-ion battery |
| Operating Temperature | -10°C to 60°C |
| Display | LCD |
| Sensors Supported | Speed, RPM, Temperature, Pressure |
| Type | Motorsport data logger |
| Lap Times | Yes |
Illustrates proper mounting of the box and provides key installation tips for optimal performance.
Details the procedure for turning the device on and off, including backlight activation.
Introduces the Setup menu for device configuration, noting specific icons for M4GPS.
Details how to view Bluetooth parameters like name and PIN, noting they are unique and non-modifiable.
Explains how to update connected sensors without switching off the device.
Guides users to check each connected sensor individually for correct operation using the device interface.
Instructs to use a magnet to test the magnetic sensor, verifying the "OK" display.
Advises warming the temperature sensor to ensure the reading increases.
Details starting the engine for RPM reading and adjusting the multiplication coefficient for engine type.
Allows visualization of satellite signal intensity, GPS coordinates, date/hour, and altitude.
Provides direct access for configuring RPM settings, noting similarity to the BOX GPS menu.
Restores factory settings, cautioning that it erases tracks and recorded data.
Details using Bluetooth for firmware updates, mentioning potential computer connection issues and alternatives.
Lists functionalities for choosing, creating, modifying, deleting, sending, and receiving tracks.
Guides through setting track name, timing type (Magnetic, Infrared), number of partials, and starting point.
Details selecting GPS, recording positions, and handling signal absence or low satellite count.
Details the process for creating tracks using both magnetic strips and GPS for partials.
Outlines selecting MAG+GPS, configuring magnetic strips, obscurity, and recording GPS positions.
Step-by-step guide for transferring tracks between two M4/M4GPS devices using Bluetooth.
Explains how to erase all recorded data, emphasizing it's irreversible and doesn't affect tracks or parameters.
Guides users to download and use the VISUALDATA2 software for data transfer from the website.
Explains how to update the device's firmware via Bluetooth for bug fixes and improvements, including important warnings.
Warns against leaving batteries in unused devices for over 2-3 weeks to prevent leakage and damage, voiding warranty.
To Next Page
