Qu Mixer User Guide 21 AP9372 iss.4
6.2 Channel Naming
Qu channels, FX, mixes and groups can be named using the screen keypad. The following can be
named:
Mono input channels
Stereo input channels
FX Returns
FX Sends
Mix
LR
Groups
Matrix
Mute Groups
DCA Groups
Channel names
The name is displayed at the top left of the
Processing and Routing screens. The name can be
edited from the Processing screen.
The pencil icon appears when the name is blank. All
names are cleared when the Qu mixer is reset or the
‘Reset Mix Settings’ scene is recalled.
Touch the name box to open the screen keypad and
edit the name.
Names can have up to 6 characters.
Touch the Shift button to type in an uppercase
character. Touch the button twice for Caps Lock.
Mute and DCA Group names
Open the Routing screen Fn key Mute/DCA page to
view the Mute and DCA Group masters. Their names
are displayed.
Touch a name box to open the screen keypad and edit
the name.
Qu-Pad iPad app names
Names stored in the Qu mixer are sent to the iPad.
These are displayed and can be edited using the iPad.
Names and Scene memories
Names are stored as part of the Qu mixer Scene
memories.
You can block or allow names in Scene recall using
the Global and per scene Filters. Three filter items
affect names:
Input/FX Names – CH, ST, Groups and FX Returns
Output Names – FX Sends, Mix, LR, Matrix
Mute/DCA Grp Masters – Mute and DCA names
Shift
To Next Page
Loading...
Need help?
General
