EasyManuals Logo
Home>ALLEN & HEATH>Music Mixer>dLive DM32

ALLEN & HEATH dLive DM32 User Manual

ALLEN & HEATH dLive DM32
14 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
MixRack Getting Started Guide
14
AP9985 Issue 5
7. Technical specs
Inputs
System
Mic/Line XLR Inputs
Balanced XLR, +48V phantom power
Measured balanced XLR in to XLR out, 20-20kHz, minimum Gain,
Pad out, signal @ 0dB (meter)
Mic/Line Preamp
Fully recallable
Dynamic Range
110dB
Input Sensitivity
-60 to +15dBu
System Signal to Noise
-92dB
Analogue Gain
+5 to +60dB, 1dB steps
Frequency Response
20Hz - 30kHz +0/-0.8dB
Pad
-20dB Active PAD
THD+N (analogue in to
out)
0.0015% @ +16dBu output, 1kHz
0dB gain
Maximum Input Level
+30dBu (PAD in)
Headroom
+18dB
Input Impedance
>4kΩ (Pad out), >10kΩ (Pad in)
Internal operating Level
0dBu
Mic EIN
-127dB with 150 source
dBFS Alignment
+18dBu = 0dBFS (+22dBu at XLR
output)
Phantom Power
indication
Per socket, internal or external
phantom power sensing, triggered at
24V
Meter Calibration
0dB meter = -18dBFS (+4dBu at
XLR out)
Outputs
Meter Peak indication
-3dBFS (+19dBu at XLR out)
Analogue XLR Outputs
Balanced, Relay protected
Sampling Rate
96kHz +/- 20 PPM
Output Impedance
<75Ω
ADC
24-bit Delta-Sigma
Nominal Output
+4dBu = 0dB meter reading
DAC
24-bit Delta-Sigma
Maximum Output Level
+22dBu
Residual Output Noise
-92dBu (muted, 20-20kHz)
Latency
0.7 ms (MixRack XLR in to XLR out,
Input to Mix)
-90dBu (muted, 20-40kHz)
+ 5 samples, Surface to Mixrack
(GigaACE hop)
+ 8 samples, DX32 to Mixrack (DX
hop)
Dimensions and
Weights
Power
Width x Depth x Height x Weight
DM32
482.6 x 313 x 325 mm x 15kg
(19" x 12.3" x 12.8" x 33lbs)
Mains Voltage Operating
Range
100-240V AC, 50/60Hz
DM48
482.6 x 313 x 369 mm x 17.5kg
(19" x 12.3" x 14.5" x 39lbs)
Mains Power
Consumption
300W max (MPS16 V1 300W)*
250W max (MPS16 V2 250W)*
DM64
482.6 x 313 x 458 mm x 21kg
(19" x 12.3" x 18" x 46lbs)
MPS16 power consumption is printed under AC inlet
Boxed
Temperature
DM32
590 x 420 x 470 mm x 17.5kg
(23.2" x 16.5" x 18.5" x 38.6lbs)
Operating Temperature
Range
DM48
590 x 420 x 510 mm x 20kg
(23.2" x 16.5" x 20.1" x 44.1lbs)
Fitted with
MPS16 V1 300w
0°C to 35°C (32°F to 95°F)
DM64
590 x 420 x 585 mm x 24kg
(23.2" x 16.5"x 23" x 52.9lbs)
Fitted with
MPS16 V2 250w
0°C to 40°C (32°F to 104°F)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ALLEN & HEATH dLive DM32 and is the answer not in the manual?

ALLEN & HEATH dLive DM32 Specifications

DM32

Power IconPower
mains voltage operating range100-240V AC, 50/60Hz
mains power consumption300W max (MPS16 V1 300W), 250W max (MPS16 V2 250W)
Operating Environment IconOperating Environment
operating temperature range (MPS16 V1 300W)0°C to 35°C
operating temperature range (MPS16 V2 250W)0°C to 40°C
phantom power indicationtriggered at 24V
Weight and Dimensions IconWeight and Dimensions
width482.6 mm
depth313 mm
height325 mm
weight15 kg

DM48

Power IconPower
mains voltage operating range100-240V AC, 50/60Hz
mains power consumption300W max (MPS16 V1 300W), 250W max (MPS16 V2 250W)
Operating Environment IconOperating Environment
operating temperature range (MPS16 V1 300W)0°C to 35°C
operating temperature range (MPS16 V2 250W)0°C to 40°C
phantom power indicationtriggered at 24V
Weight and Dimensions IconWeight and Dimensions
width482.6 mm
depth313 mm
height369 mm
weight17.5 kg

DM64

Power IconPower
mains voltage operating range100-240V AC, 50/60Hz
mains power consumption300W max (MPS16 V1 300W), 250W max (MPS16 V2 250W)
Operating Environment IconOperating Environment
operating temperature range (MPS16 V1 300W)0°C to 35°C
operating temperature range (MPS16 V2 250W)0°C to 40°C
phantom power indicationtriggered at 24V
Weight and Dimensions IconWeight and Dimensions
width482.6 mm
depth313 mm
height458 mm
weight21 kg

Related product manuals