GL2200
S
ERVICE
M
ANUAL
7
Ordering an Assembly
The following assemblies are supplied fully tested. Please note that several of these need to be
assigned according to their position in the console. This is achieved by soldering wire links or
assignment pads. It is best to check the assignment settings of the assembly you are replacing before
removing it from the console. Please quote the description and order code for the part required.
Printed Circuit Board (PCB) Assemblies:
* specify position of PCB assembly
Mono Input & Connector PCB assembly 002-412
Stereo Input & Connector PCB assembly 002-442
* Group PCB assembly 002-439
OSC/Noise PCB assembly 002-453
Left PCB assembly 002-440
Right PCB assembly 002-441
Switch Mode PSU assembly (12 & 16) 002-456
Switch Mode PSU assembly (24 & 32) 002-457
IDC connector harnesses:
GL2200-412 20 way Main harness AL3535
GL2200-416 20 way Main harness AL3536
GL2200-424 20 way Main harness AL3537
GL2200-432 20 way Main harness AL3538
The Chassis Trim
GL2200 (all formats) Left & Right Chassis side trims AA2539-L/R
Write-on strip (specify console size) AK0327
To Next Page
Loading...
Need help?
General
