GS3000
U
SER
G
UIDE
35
E
RROR
M
ESSAGES
In the event of an automation error an error message is displayed. This is a two part message
comprising an error number and an error code. For example, should a MIDI Dump In error be detected
the following error number will be displayed:
En0
Press any automation key to show the error code, which gives further information about the error.
Ec1
Press any automation key to clear the error display and return the system to normal operation.
The following error messages apply:
ERROR
NUMBER (n)
ERROR
CODE (C)
DESCRIPTION
0 Press RECALL MIDI Dump In error
0 Packet 0 not received
1 Missing packet
2 Buffer overflow
3 Checksum error
4 Dump timeout
1 Press RECALL EEPROM memory access error
0 Write error
1 Page write error
2 Read error
3 Page read error
4 Byte read error
2 Press RECALL Power brown-out detected
To Next Page
Loading...
Need help?
General
