1. Installing the Expander
1.1 Free standing
The Expander can be operated as a freestanding unit for shelf or floor use.
Ensure adequate air flow around the unit. It must not be covered in any way. Always
stand the unit on a firm flat surface away from any soft furnishings or carpet.
1.2 Rack mounting and flight casing
The GX4816 is designed as a 19 inch rack mount unit and occupies 5U of rack space. The plastic feet may
need to be removed before rack mounting; retain them for future use.
For rental, touring and other portable use, we recommend that you use a professional grade flight case.
Ensure natural convection of airflow around the unit by allowing good ventilation
below, in front of and behind the unit. Rack equipment known to produce a
significant amount of heat should not be mounted directly below the unit. Forced
convection by means of a rack mounted fan-tray may be desirable in situations
where space is restricted and the ambient air temperature is high.
1.3 Rack ears
The rack ears can be detached for shelf or floor operation. They are secured to the sides of the Expander
with 3 screws each as indicated below. Use a Pozidriv screwdriver to remove the rack ears. Fix in place
using the M6*12 countersink pozi screws provided, with a torque setting of 6N-m.
To Next Page
Loading...
Need help?
Power
Operating Environment
Weight and Dimensions
