Surface Getting Started Guide
Balanced XLR, +48V phantom power
Measured balanced XLR in to XLR out, 20-20kHz, minimum Gain,
Pad out
THD+N (analogue in to
out)
0.0015% @ +16dBu output, 1kHz
0dB gain
>4kΩ (Pad out), >10kΩ (Pad in)
+18dBu = 0dBFS (+22dBu at XLR
output)
Per socket, internal or external
phantom power sensing, triggered at
24V
0dB meter = -18dBFS (+4dBu at
XLR out)
AES3 2 Ch XLR, 2.5Vpp balanced
terminated 110 Ω
-3dBFS (+19dBu at XLR out)
SRC on each pair, range 32k -
192kHz, with bypass option
Balanced, Relay protected
0.7 ms (MixRack XLR in to XLR out,
Input to Mix)
+ 5 samples, Surface to Mixrack
(GigaACE hop)
+4dBu = 0dB meter reading
+ 8 samples, DX32 to Mixrack
(DX hop)
Mains Voltage Operating
Range
300W max (MPS16 V1 300W)*
250W max (MPS16 V2 250W)*
AES3 2 Ch XLR, 2.5Vpp balanced
terminated 110 Ω
MPS16 power consumption is printed under AC inlet
96kHz sampling rate, switchable to
48kHz, 44.1kHz
Operating Temperature Range
Mono/stereo .WAV files,
16/24bit, 44.1/48/96kHz
Fitted with
MPS16 V1 300w
0°C to 35°C (32°F to 95°F)
Stereo .WAV files,
24bit 96kHz
Fitted with
MPS16 V2 250w
0°C to 40°C (32°F to 104°F)
Width x Depth x Height x Weight
Width x Depth x Height x Weight
870 x 728 x 413 mm x 28kg
(34.3" x 28.7" x 16.3" x 62lbs)
1045 x 920 x 560 mm x 41kg
(41.1" x 36.2" x 22" x 90.4lbs)
1115 x 728 x 413 mm x 35kg
(43.9" x 28.7" x 16.3" x 77lbs)
1290 x 920 x 560 mm x 50kg
(50.8" x 36.2" x 22" x 110.2lbs)
1325 x 728 x 413 mm x 41kg
(52.2" x 28.7" x 16.3" x 90lbs)
1485 x 920 x 560 mm x 56kg
(58.5" x 36.2" x 22" x 123.5lbs)