Allen & Heath 25 ZED-14 User Guide
To record the audio on tracks 1 & 2, click the
R buttons so they light up red, then the record
button (circle) on the transport controls on
the top icon toolbar. (Or select larger trans-
port controls from Views).
The audio wave profile will show in the track
panes.
Click stop (Square) when finished.
To listen to the recording, click rewind, then
de-select the input echo buttons (to the right
of the R buttons. Also disarm the tracks by de-
selecting the R buttons.
Click Play (or spacebar) and the recorded au-
dio should play to the USB port on your ZED
mixing console where you can either monitor
it, route it to the main stereo bus, or route it
to stereo channel 11-12.
You can use SONAR LE and your ZED mixer together in many ways, for example straightforward recording of a stereo
mix, recording tracks individually to build up a song, or sending a postfade mix from ZED and inserting an effects plug-in
from SONAR LE, returning the post-effects signal to the mix in ZED.
It is a very versatile combination and we hope you find it a creative and enjoyable product partnership.
To Next Page
Loading...
Need help?
General
