EasyManuals Logo
Home>ALLEN & HEATH>Music Mixer>ZED Sixty-10FX

ALLEN & HEATH ZED Sixty-10FX User Manual

ALLEN & HEATH ZED Sixty-10FX
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Allen & Heath 15 ZED Sixty 10FX & 14FX User Guide
Mic Input Socket
Standard 3-Pin XLR socket wired as Pin 1=Chassis, Pin 2=hot
(+), Pin 3=Cold (-).
Line Input Jack Socket
Standard 1/4ā€ (6.25mm) Jack socket for balanced or unbalanced
line level signals. Wired Tip=Hot(+), Ring=cold (-),
Sleeve=Chassis.
The Line input connects to the XLR input through a circuit, so
be aware that the two signals will add together if both inputs
are plugged in simultaneously.
Gain Control
This adjusts the gain of the input amplifier to match the signal
level of the source. The gain is varied from +10dB to +60dB for
signals plugged in to the xlr socket (Mic Input) and –10dB to
+40dB for signals plugged into the Line input jack.
100Hz Hi-pass Filter
The Hi-pass filter is used for reducing pop noise and rumble
from microphone signals. It is a single pole (6dB per octave)
filter with a corner frequency set at 100Hz.
The filter affects signals from both Mic XLR and Line jack sock-
et.
MONO INPUT CHANNEL 1&2 (10FX) 1-6 (14FX)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ALLEN & HEATH ZED Sixty-10FX and is the answer not in the manual?

ALLEN & HEATH ZED Sixty-10FX Specifications

General IconGeneral
BrandALLEN & HEATH
ModelZED Sixty-10FX
CategoryMusic Mixer
LanguageEnglish

Related product manuals