8 ControlNet PLC-5 Hot Backup System
Publication 1785-10.8 - October 1998
European Union Directive Compliance
If this product has the CE mark, it is approved for installation within the
European Union and EEA regions. It has been designed and tested to meet
the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in
whole or in part, documented in a technical construction file:
• EN 50081-2EMC - Generic Emission Standard,
Part 2 - Industrial Environment
• EN 50082-2EMC - Generic Immunity Standard,
Part 2 - Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage,
by applying the safety requirements of EN 61131-2 Programmable
Controllers, Part 2 - Equipment Requirements and Tests.
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as these Allen-Bradley publications:
• Industrial Automation Wiring and Grounding Guidelines for Noise Immunity
(publication 1770-4.1)
• Guidelines for Handling Lithium Batteries (publication 1756-5.68)
• Automation Systems Catalog
This equipment is classified as open equipment and must be mounted in an
enclosure during operation to provide safety protection.
To Next Page
Loading...
Need help?
General
