Allen-Bradley PowerFlex 6000T User Manual

Rockwell Automation Publication 6000-IN100A-EN-P - August 2020 17
Chapter 1 Drive Mechanical Installation
6. Remove the right side plate, put the secondary cables close to Tx winding,
and disassemble three horizontal baffles.
7. Remove the seismic cover at the front and back side of the JC, and the
right side of the drive.
8. Drill anchor holes at the left-hand side of the cabinet.
9. Drill anchor holes at the right-hand side of the cabinet, then install the
anchors.
10. Install all the parts in reverse order of removal.
Step 4 Step 6Step 5
Step 7 Step 9Step 8
Step 10

Allen-Bradley PowerFlex 6000T Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 6000T
Category	DC Drives
Language	English