ACCESSORIES
• Self-Tapping Screw (M4 x 14)
.....................................
.4
• Mounting Bracket and Screws
.........................
4
SETS
• Logo Plate*
.............................
.
..
.........................................
1
• Hexagon Wrench (Large/Small)
....
.
.....................
l
SET
* The Logo Plate
is
temporarily affixed
to
the
top
cover.
INSTALLATION
Due
to
the
high power
output
of
the
R-A75M/R-A60F considerable heat
is
produced
when
the
amplifier
is
in operation. For this reason,
the
amplifier should be mounted in a location
which will allow for free circulation
of
air, such
as
inside
the
trunk. For alternate installation locations,
please contact your authorized Alpine dealer.
1.
Attach
the
Mounting
Brackets
to
the
bottom
of
the
amplifier
with
eight
screws.
-Tr
Screws
(x
8)
~
(included)
•
2.
Using
the
amplifier
as
a template, mark
the
four
screw locations.
3.
Make sure there are
no
objects behind
the
surface
that
may become damaged
during
drilling.
4.
Drill
the
screw holes.
5.
Position the R-A75M/R-A60F over
the
screw
holes, and secure
with
four
self-tapping screws.
Self-Tapping Screws
M4
x 14
mm
(x
4)
(included)
(
I
'
I
'
'
I
Holes (x
4)
'
I
(e.g.
R-A60F)
ATTACHING
THE
LOGO
PLATE
The Logo Plate
is
temporarily affixed
to
the
top
cover.
1.
Peel
the Logo Plate along
with
the
backing
sheet from
the
top
cover.
2.
Peel
the
backing sheet from
the
Logo Plate, then
attach
it
to
this
unit
in your desired direction .
Logo Plate
Backing Sheet ~ /
~
(e.g.
R-A60F
)
3
-EN
To Next Page
Loading...
Need help?
General
