INSTALLATION
Vecto r H® S eries ▪ Opera tor’s Manual ▪ M N-462 9 5 ▪ Rev 7 ▪ 6/22
20
How to Unpack the Oven
Before you begin Make sure you have:
▪ An appropriate lifting device and enough personnel to safely move and position
the weight of the oven.
□ VMC-H2/H2H: 213 lb (97 kg)
□ VMC-H3/H3H: 278 lb (126 kg)
□ VMC-H4/H4H: 348 lb (158 kg)
□ VMC-H2HW: 243 lb (110 kg)
□ VMC-H3HW: 312 lb (142 kg)
▪ Cutting tools to remove the packaging.
Unpack the oven To unpack the oven, do the following.
Step Action
1. Remove the box. Save all packing materials for inspection by the carrier.
2. Remove the shrink wrap.
3. Cut the restraining straps.
4. Remove the tape a that holds the filters (if equipped).
Remove the screws b that holds the filters (if equipped).
5. Remove the foam from each chamber.
6. Remove the oven from the pallet.
Result The oven is now unpacked.
NOTE: Examine the appliance for damage. If the appliance
has been damaged, do not use the appliance until it has
been inspected by an authorized service provider. Contact
your carrier or Alto-Shaam customer service.
To Next Page
Loading...
Need help?
General
