Troubleshooting
23
Troubleshooting
The product left our warehouse in perfect condition. If you do, however, discover a
problem, see if you can solve it by using the solutions offered in the following table. If
these do not work, contact our Customer Services Department.
Problem Possible cause Troubleshooting
The product does
not work.
The mains plug is not
connected to a power
socket.
Only connect the appliance to a
properly installed power socket.
The local mains voltage must
correspond to the technical data
for the appliance.
Grinding noises Stainless steel casing
or circulation pump not
correctly assembled.
Assembly the stainless steel
casing and circulation pump as
described in Seite 15.
Error code EE1 Too little water in the
container.
Fill the container with water so
that the water level is always
between the two marks MIN and
MAX. Switch on the appliance
again.
Disposal
PACKAGING
Your device is packaged to protect it from transportation damage.
Packaging is raw material and can be reused or added to the recycling
system.
APPLIANCE
According to Directive 2012/19 / EU do not dispose of the product in the
household rubbish at the end of its service life. Take it to a local collection
point for used appliances in order to comply with environmental
regulations. Contact your local authority to fi nd out where your nearest
collection point is located.
To Next Page
Loading...
Need help?
General
