A
6
7
8
14
➔
6
Fit Audiotherm on Visiotherm E, turn until steam and radio
symbol appears.
7
Navigenio now has radio contact and flashes blue. Now
everything works fully automatically: Navigenio and Audiotherm
control the heating and reducing of energy completely by
themselves and monitor the cooking time as well.
8
The ideal temperature is maintained automatically
during the entire cooking time.
➔If you want to add another ingredient after some time, remove
the Audiotherm from the Visiotherm E and lift the EasyQuick.
Add the ingredient and fit the EasyQuick again. Fit Audiotherm
on Visotherm E again, turn until the steam and radio symbol
appears and cook completely.
When the set cooking time is over, you will be called to eat with
a single beep. If you are not at the place immediately, no problem:
Food is kept warm at 60 °C for one hour.
➔At the end, switch o Navigenio’s power plug.
For manual control of the cooking process see chapter 6 point
1
.
AMCI_EasyQuick_II_GAL_21042016.indd 14 21.04.16 12:28
To Next Page
Loading...
Need help?
General
