1
2
3
15
6. Manual steaming with
Softiera insert and EasyQuick
➔Prepare the food.
➔Select suitable pot and place Softiera insert inside. Fill a cup
of water (approx. 120-150 ml) in the pot, ensuring that the
water level is not higher than the perforated base surface. Place
prepared food inside.
➔Fit sealing ring that corresponds to the diameter of the pot in
the EasyQuick and fit this on the pot.
➔ Set pot on hotplate. Switch on Audiotherm with right or left button,
enter desired cooking time with right button, e.g. 10 minutes.
➔
1
Fit Audiotherm on Visiotherm E, turn until the steam symbol
appears.
➔Set hotplate at highest level and heat it.
2
The red indicator moves in the direction of the steam window.
As soon as it is reached, a double beep will be heard.
➔Stop beep with right or left button. Reduce hotplate to lower level.
➔
3
Watch Audiotherm and regulate the energy input of the
hotplate as required:
If the temperature is too high, there appears a “
-
”.
Reduce energy further or switch o completely.
If the temperature is too low, there appears a “+”.
Increase energy input.
As soon as the set cooking time is over, a single beep will be heard.
➔Stop beep with right or left button.
➔Serve the food or if required, increase cooking time.
➔At the end, switch o hotplate completely.
AMCI_EasyQuick_II_GAL_21042016.indd 15 21.04.16 12:28
To Next Page
Loading...
Need help?
General
