pag 3 rev. 1.1
‐
K-LCD Keyboard
FEATURES and OPERATION
Power supply voltage: 13.8Vdc
Rated current: 25mA
Maximum current: 160mA
Compatible with: all panel
Addresses adjustable from the menu without the use of mechanical dip-switches
Adjustable backlighting time
Language selection
Buzzer for sounder input and output time
Enable / disable switch tamper from menu
Signaling LED:
o Green LED on: system ready (all areas closed)
o Red LED on: new event to be read in event log
o Yellow LED on: control unit activated
o Blue LED: signal of transponder operation enabled
Keyboard adjustments.
To access the menu of the parameter settings of the Keyboard, simultaneously touch the “X” and “V”:
Use the UP and DOWN arrow keys to scroll through the:
‐ Keyboard ID: With the Right and Left arrow keys, set a value and confirm with enter V.
‐ Display Brightness duration :With the Right and Left arrow keys, set a value and confirm with
enter V.
‐
Language selection:With the Right and Left arrow keys, select language and confirm with enter
V. (available: ENGLISH – ITALIAN)
‐
Tamper protection enable/disable :With the Right and Left arrow keys, set a value and confirm
with enter V.