www.amcelettronica.com
SR136 V1.2.1 IT-EN
DESCRIZIONE DELLA SCHEDA ELETTRONICA - DESCRIPTION OF THE ELECTRONIC BOARD
funzioni dip-swicth
dip-switch funcions
dip-switch mode
terminali batteria
tampone
backup battery
terminals
terminali altoparlante
speaker terminals
connettore lampeggiatore
(posto sul tappo antischiuma)
lamp connector
( on the antifoam cap )
TAMPER antiapertura
Anti-opening TAMPER
morsetti di collegamento alla centrale
terminals for the connection to the control unit
--terminali + - = alimentazione (13.8Vcc)
-- TAMPER = terminali di collegamento alla linea tamper della centrale
-- terminale S = comando attivazione dispositivo
-- terminale A = comando stato impianto centrale (serve per avere le segnalazioni sonore e/o luminose)
-- terminals + - = siren power supply ( 13.8Vcc )
-- TAMPER = terminals for the connection to the control unit tamper line
-- terminal S = siren activation trigger
-- terminal A = control unit status trigger ( need to get the sounding and / or bright signalling )