Read these instructions before starting procedure. For
additional information visit www.andersenwindows.com.
For questions call 1-888-888-7020.
Para obtener una versión en español de esta guía,
visite el sitio www.andersenwindows.com
· Use caution when working at elevated heights and around window and door openings. Follow the manufacturers’
instructions for ladders and scaffolding. Failure to do so could result in injury or death.
· Follow manufacturers’ instructions for hand and power tools. Always wear safety glasses. Failure to do so could result in
injury, product or property damage.
· Windows and doors can be heavy. Use safe lifting techniques and a reasonable number of people with enough strength
to lift, carry, and install window and door products. Heavier windows and doors will require mechanical assistance. Failure
to do so could result in injury, product or property damage.
· Metal fasteners and components could corrode when exposed to preservative-treated or fire-retardant treated lumber.
Use approved fasteners and components to fasten window or door. Failure to do so could cause a failure resulting in
injury, product or property damage.
Hinge Replacement &
Hinge and Hardware Adjustment
Product Series: A-Series, 400 Series
Product Type: Hinged Inswing Patio Doors
(Manufactured After November 2005)
“Andersen” and all other marks where denoted are trademarks of Andersen Corporation. ©2008-2023 Andersen Corporation. All rights reserved.
0005413 BC-00 04/13/23
Tools and Supplies Needed:Parts Included:
WARNING
Safety
Glasses
Phillips
Screwdriver
Flat Blade
Screwdriver
Pencil
5/32" Hex Key
(included with Patio Door)
Hinge (1)
#10 x 3" Screw (2)
#10 x 1-3/4" Screw (4)
#10 x 1" Screw (2)
▶ Hinge Replacement page 2.
▶ Hinge and Hardware Adjustment page 3.
Horizontal
Adjustment
Screw
Vertical
Adjustment
Screw
To Next Page
Need help?
General
