Ansul WOM-4 User Manual

Automatic Oscillation Mode
1. Turn on main water supply to monitor. The monitor will oscil-
late automatically at set limits.
2. To adjust stream elevation of WOM-3 monitor, loosen speed
ball handle and raise or lower tiller bar. Then retighten speed
ball handle. (See Figure 1.)
To adjust stream elevation of WOM-4 monitor, turn handwheel
clockwise to raise or counterclockwise to lower. (See
Figure 2.)
Manual Operation
1. Turn selector valve handle (at side of enclosure) up to
TEST/MANUAL position. (See Figure 4.)
2. Pull release pin from side of monitor inlet base to disengage
monitor from oscillating mechanism.
3. Use tiller bar to rotate monitor.
4. To adjust stream elevation of WOM-3 monitor, loosen speed
ball handle and raise or lower tiller bar. (See Figure 1.)
To adjust stream elevation of WOM-4 monitor, turn handwheel
clockwise to raise or counterclockwise to lower. (See
Figure 2.)
OPERATION
Page 7
WARNING
!
FORCE OF DISCHARGE STREAM CAN CAUSE SEVERE
PERSONAL INJURY. DO NOT OPERATE MONITOR WHEN
PERSONNEL ARE IN PATH OF STREAM.
WARNING
!
OSCILLATING MECHANISM CONTAINS MOVING PARTS
THAT CAN CAUSE SEVERE PERSONAL INJURY. DO NOT
OPERATE MONITOR WITH COVER REMOVED FROM
E
NCLOSURE.

Ansul WOM-4 Specifications

General

Brand	Ansul
Model	WOM-4
Category	Measuring Instruments
Language	English