12
OSD Setting
Basic and simple instruction on the control keys.
Luminance Color Setup Picture Boost OSD Setup
ExitExtra
Contrast 50
Brightness 90
Eco Mode Standard
Gamma Gamma1
DCR Off
HDR Mode Off
Game Setting
1). Press the
OK
button to activate the OSD window.
2). Press DOWN or UP to navigate through the functions. Once the desired function is highlighted, press the
button to activate it, press DOWN or UP to navigate through the sub-menu functions. Once the desired
function is highlighted, press
button to activate it.
3). Press DOWN or UP to change the settings of the selected function. Press to exit. If you want to adjust
any other function, repeat steps 2-3.
4). OSD Lock Function: To lock the OSD, press and hold the
MENU-button while the monitor is o and then
press power button to turn the monitor on. To un-lock the OSD - press and hold the
MENU-button while
the monitor is o and then press power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is disable to adjust.
2). Eco Modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only one state
can exist.