AOC 24G15N User Manual

10
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure.
Follow these steps:
1. Remove the base.
2. Follow the manufacturer’s instructions to assemble the wall mounting arm.
3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the
monitor.
4. Insert the 4 screws into the holes and tighten.
5. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on
attaching it to the wall.
Noted: This monitor accepts a 100mm * 100mm VESA Compliant mounting interface.
VESA Mounting Screw: M4 * (10+X) mm (X=Thickness of Wall mount bracket).
Always contact manufacturer for wall-mount installation.
WARNING:
1. To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than
-5 degrees.
2. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
100mm
M4
100mm

AOC 24G15N Specifications

General

HDMI	Yes
Built-in USB hub	No
DisplayPort version	1.4
Headphone connectivity	3.5 mm
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Panel type	VA
Screen shape	Flat
Display diagonal	23.8 \
Display technology	-
Maximum refresh rate	180 Hz
Warranty period	3 year(s)
Product color	Black
Market positioning	Gaming
Sustainability certificates	RoHS
AC input voltage	100 - 240 V
Power supply type	Internal
AC input frequency	50/60 Hz
Power consumption (max)	32 W
Power consumption (standby)	0.3 W
Power consumption (typical)	- W
Cables included	AC, HDMI
HDMI cable length	1.8 m