To Next Page

To Previous Page

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.

比例

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before

this procedure. Follow these steps:

1. Remove the base.

2. Follow the manufacturer’s instructions to assemble the wall mounting arm.

3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in

the back of the monitor.

4. Insert the 4 screws into the holes and tighten.

5. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for

instructions on attaching it to the wall.

M=4.0Max

Dk=8.0

H=2.0

L=10+X

D3.86-3.96

M4-P0.7

Speciﬁcation of wall hanger screws: M4*(10+X)mm (X=Thickness of Wall mount bracket)

100mm

Note: VESA mounting screw holes are not available for all models, please check with the dealer or

ofcial department of AOC. Always contact manufacturer for wall-mount installation.

* Display design may differ from those illustrated.

WARNING:

1. To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward

by more than -5 degrees.

2. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.

Questions and Answers:

Need help?

Do you have a question about the AOC 24G4 and is the answer not in the manual?

AOC 24G4 Specifications

General

Color gamut	103 %
Pixel pitch	0.2745 x 0.2745 mm
Screen shape	Flat
Display diagonal	23.8 \
Display technology	-
Native aspect ratio	16:9
Maximum refresh rate	180 Hz
NTSC coverage (typical)	113 %
Viewable size, vertical	296.46 mm
sRGB coverage (typical)	126 %
Contrast ratio (dynamic)	80000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.7 million colors
Viewable size, horizontal	527.04 mm
Display brightness (typical)	300 cd/m²
High Dynamic Range (HDR) supported	Yes
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10)
HDCP version	2.2
DisplayPort version	1.4
Input current	1.5 A
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (standby)	- W
Power consumption (typical)	23 W
Pivot angle	-90 - 90 °
Tilt angle range	-5 - 23 °
Panel mounting interface	100 x 100 mm
Package depth	189 mm
Package width	613 mm
Package height	477 mm
Package weight	6460 g
Feet color	Black/Red
Certification	BSMI / KC / KCC / e-Standby / RCM / MEPS / CE / CB / FCC
Product color	Black, Red
Front bezel color	Black
Market positioning	Gaming
Cables included	DisplayPort
DisplayPort cable length	1.8 m

Weight and Dimensions