AOC CQ27G3S User Manual

10
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure.
Follow these steps:
1. Remove the base.
2. Follow the manufacturer’s instructions to assemble the wall mounting arm.
3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of
the monitor.
4. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on
attaching it to the wall.
Noted: VESA mounting screw holes are not available for all models, please check with the dealer or ofcial department of
AOC.
-5°
0° 90°
* Display design may differ from those illustrated.
Warning
：
1. To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more
than -5 degrees.
2. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.

AOC CQ27G3S Specifications

General

Panel type	VA
Pixel pitch	0.2331 x 0.2331 mm
Backlight type	W-LED
Display diagonal	27 \
Surface hardness	3H
Anti-glare screen	Yes
Adobe RGB coverage	96 %
Display technology	LED
Native aspect ratio	16:9
NTSC coverage (typical)	98 %
Screen curvature rating	1000R
sRGB coverage (typical)	118 %
Contrast ratio (dynamic)	80000000:1
Contrast ratio (typical)	3000:1
Display number of colors	16.7 million colors
Display diagonal (metric)	68.6 cm
Display brightness (typical)	300 cd/m²
AMD FreeSync type	FreeSync Premium
Feet color	Black
Certification	RCM / MEPS / CE / CB / FCC
Product color	Black, Red
Front bezel color	Black/Red
Market positioning	Gaming
Exterior finish type	Textured
Tilt angle range	-5 - 23 °
Height adjustment	130 mm
Cable lock slot type	Kensington
Number of OSD languages	19
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), CRO, CZE, DEU, DUT, ENG, ESP, FIN, FRE, ITA, JPN, KOR, POL, POR, RUS, SWE, TUR, UKR
HDCP version	2.2
USB hub version	3.2 Gen 1 (3.1 Gen 1)
DisplayPort version	1.2
Headphone connectivity	3.5 mm
USB Type-A downstream ports quantity	4
AC input voltage	100 - 240 V
Power supply type	Internal
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	46 W
Package depth	225 mm
Package width	690 mm
Package height	523 mm
Package weight	8600 g
Cables included	AC
HDMI cable length	1.8 m
Sustainability certificates	WEEE

Weight and Dimensions

Depth (with stand)	258.8 mm
Width (with stand)	605.02 mm
Height (with stand)	531.9 mm
Weight (with stand)	5900 g
Depth (without stand)	95.04 mm
Height (without stand)	367.5 mm
Weight (without stand)	4600 g