To Next Page

To Previous Page

9. White- Balance, Luminance Adjustment

The white color temperature should be app. warm ([6500K]: x=0.313, y=0.329). There

should be at least one alternative white color temperature selectable by the user(e.g. [cool]

9300K x=0.283 y=0.297 ，[normal] 7300K x=302 y=318, [SRGB] x=0.313 y=0.329) Those four

channels should be factory preset and not be possible to be modified. A fifth channel should be

available, which can be defined by the user.

The measurement position is the center of the display(5) at brightness set to center and

Contrast and Brightness set to factory preset. The tolerance of the color coordinates should be less

than ± 0.030

Enter into factory mode:

Press-button case：Turn on the power .Then press the “MENU” button and hold it there pull out the power

cord and plug the power cord. Continue press “MENU” button until the picture appears.

Touch-button case：Turn off the power .Then press the “left” button and “right” button at the

same time and hold it there, turn on the power. Continue press the “left” button and “right” button until the

picture appears.

Other manuals for AOC e2070Swn

Questions and Answers:

Need help?

Do you have a question about the AOC e2070Swn and is the answer not in the manual?

General