To Next Page

To Previous Page

4.3 Panel Specification

4.3.1 General Features

BM215WF4-TJC1 is a Color Active Matrix Liquid Crystal Display with an integral Light Emitting Diode (LED)

backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type

display operating in the normally white mode. It has a 21.5 inch diagonally measured active display area with Full

HD resolution (1080 vertical by 1920 horizontal pixel array) Each pixel is divided into Red, Green and Blue

sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is

determined with a 8-bit gray scale signal for each dot, thus, presenting a palette of more than 16,7M colors with

Advanced-FRC(Frame Rate Control). It has been designed to apply the interface method that enables low power,

high speed, low EMI. FPD Link or compatible must be used as a LVDS(Low Voltage Differential Signaling) chip. It is

intended to support applications where thin thickness, wide viewing angle, low power are critical factors and graphic

displays are important. In combination with the vertical arrangement of the sub-pixels, the BM215WF4-TJC1

characteristics provide an excellent flat panel display for office automation products such as monitors.

4.3.2 Display Characteristics

All manuals and user guides at all-guides.com

all-guides.com

Other manuals for AOC e2260Swda

Questions and Answers:

Need help?

Do you have a question about the AOC e2260Swda and is the answer not in the manual?

General