EasyManuals Logo
Home>AOC>Monitor>e2450Swd

AOC e2450Swd User Manual

AOC e2450Swd
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
49
Troubleshoot
Problem & Question
Possible Solutions
Power LED Is Not ON
Make sure the power button is ON and the Power Cord is properly connected
to a grounded power outlet and to the monitor.
No images on the screen
Is the power cord connected properly?
Check the power cord connection and power supply.
Is the cable connected correctly?
(Connected using the D-sub cable)
Check the DB-15 cable connection.
(Connected using the DVI cable)
Check the DVI cable connection.
* DVI input is not available on every model.
If the power is on, reboot the computer to see the initial screen (the login
screen), which can be seen.
If the initial screen (the login screen) appears, boot the computer in the
applicable mode (the safe mode for Windows ME/XP/2000) and then change
the frequency of the video card.
(Refer to the Setting the Optimal Resolution)
If the initial screen (the login screen) does not appear, contact the Service
Center or your dealer.
Can you see "Input Not Supported" on the screen?
You can see this message when the signal from the video card exceeds the
maximum resolution and frequency that the monitor can handle properly.
Adjust the maximum resolution and frequency that the monitor can handle
properly.
Make sure the AOC Monitor Drivers are installed.
Picture Is Fuzzy & Has
Ghosting Shadowing Problem
Adjust the Contrast and Brightness Controls.
Press to auto adjust.
Make sure you are not using an extension cable or switch box. We
recommend plugging the monitor directly to the video card output connector
on the back .
Picture Bounces, Flickers Or
Wave Pattern Appears In The
Picture
Move electrical devices that may cause electrical interference as far away
from the monitor as possible.
Use the maximum refresh rate your monitor is capable of at the resolution
your are using.

Other manuals for AOC e2450Swd

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AOC e2450Swd and is the answer not in the manual?

AOC e2450Swd Specifications

General IconGeneral
3DNo
Pixel pitch0.2715 x 0.2715 mm
Aspect ratio16:9
Display diagonal23.6 \
Viewable size diagonal598 mm
Viewable size, vertical293.22 mm
Viewing angle, vertical160 °
Contrast ratio (dynamic)20000000:1
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Viewable size, horizontal521.28 mm
Viewing angle, horizontal170 °
Digital vertical frequency55 - 75 Hz
Digital horizontal frequency30 - 83 kHz
Display brightness (typical)300 cd/m²
Supported graphics resolutions1920 x 1080 (HD 1080)
Placement supportedHorizontal
Screen saving functionsYes
Number of products included1 pc(s)
DVI-I ports quantity-
USB Type-A downstream ports quantity0
CertificationCE, cCSAus, FCC, CCC, RoHs, EPA 5.0, Windows Vista/Win7, china RoHs
Product colorBlack
LED indicatorsPower
Tilt angle range-4 - 17 °
Number of OSD languages16
Panel mounting interface75 x 75 mm
AC input voltage110 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)30 W
Package depth113 mm
Package width625 mm
Package height437 mm
Package weight7300 g
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)205.1 mm
Width (with stand)569.7 mm
Height (with stand)413.9 mm
Weight (with stand)4450 g
Width (without stand)- mm
Weight (without stand)- g

Related product manuals