To Next Page

To Previous Page

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this

procedure. Follow these steps:

1 Remove the base.

2 Follow the manufacturer's instructions to assemble the wall mounting arm.

3 Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the

back of the monitor.

4 Insert the 4 screws into the holes and tighten.

5 Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for

instructions on attaching it to the wall.

Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official

department of AOC.

Questions and Answers:

Need help?

Do you have a question about the AOC e950Swn and is the answer not in the manual?

AOC e950Swn Specifications

General

3D	No
HD type	-
Panel type	TN+Film
Pixel pitch	0.3 x 0.3 mm
Aspect ratio	16:9
Backlight type	W-LED
Display diagonal	18.5 \
Display resolution	1366 x 768 pixels
Display technology	LED
Vertical scan range	50 - 76 Hz
Horizontal scan range	30 - 60 kHz
Viewable size diagonal	230.4 mm
Viewable size, vertical	409.8 mm
Contrast ratio (dynamic)	20000000:1
Contrast ratio (typical)	600:1
Display number of colors	16.78 million colors
Display brightness (typical)	200 cd/m²
Supported graphics resolutions	1366 x 768
On/off switch	Yes
Placement supported	Horizontal
DVI-D ports quantity	0
Certification	CB, CE, FCC, GOST, ISO 9241-307, RoHS, TÜV-GS, Ukraine Safety, Win7, cCSAus
Product color	Black
LED indicators	Power
Tilt angle range	-4 - 17 °
Cable lock slot type	Kensington
Number of OSD languages	16
Panel mounting interface	75 x 75 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.2 W
Power consumption (standby)	0.3 W
Power consumption (typical)	12 W
Cables included	AC, VGA
Sustainability certificates	ENERGY STAR

Weight and Dimensions