To Next Page

To Previous Page

INSTALLATION

Connecting RF antenna and Cable TV

Make sure the power is OFF before installing your LCD TV.

1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV

channels into memory with Auto Scan function when using an antenna TV system. This air

input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV

system (ATSC) can be found by scanning “AIR” with Auto Scan function (see page 21).

2) Cable TV: Connect the LCD TV to the cable with CATV and Digital cable. Preset the cable TV

channels into memory with Auto Scan function when using a cable TV system. The cable

input jack both support CATV and Digital cable systems. Besides, the CATV system (cable TV)

and Digital cable system (clear QAM) can be found by scanning “Cable” with Auto Scan

function (see page 21).

Note: Users can select either Air or Cable TV cable to be connected to the TV IN jack. To

watch both of them, use an adapter to connect both Air and Cable cables to the jack.

Connecting to DVD / Set Top Box

Connect Video/ Audio cables from compatible devices into the back panel of LCD TV.

1) With AV cable:

RF Cable, CATV/ Digital cable

or Adapter (not supplied)

VCD or DVD Player

RCA A/V Cable

Other manuals for AOC L22W898

Questions and Answers:

Need help?

Do you have a question about the AOC L22W898 and is the answer not in the manual?

General

HD type	WSXGA+
Display diagonal	22 \
Progressive scan	No
Display brightness	300 cd/m²
Display resolution	1680 x 1050 pixels
Display technology	LCD
Native aspect ratio	16:10
Contrast ratio (dynamic)	5000:1
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	170 °
Supported graphics resolutions	1680 x 1050 (WSXGA+)
Package depth	523 mm
Package width	564 mm
Package height	150 mm
Package weight	8000 g
Plug and Play	Yes
Certification	FCC, cULus
Tuner type	Analog & digital
Analog signal format system	NTSC
Digital signal format system	ATSC
SCART ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	1
Product color	Black
LED indicators	Stand-by
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	55 W
RMS rated power	5 W

Weight and Dimensions