To Next Page

To Previous Page

BASIC OPERATION

To operate your LCD TV, you may use the TV remote control or bottom panel buttons to select

input source, change channels, or adjust volume.

Turning on the LCD TV

Before using the LCD TV:

1. Connect external equipment properly.

2. Insert the power plug and the power LED indicator will light orange.

Power On/Off

To turn the LCD TV on/off :

Press the POWER button under the LCD TV, or press the POWER button on your remote control

to turn on/off the TV. The power LED indicator lights blue when the LCD TV is on.

Select input source

To select the required input source:

Press the INPUT button on the remote control, Use ▲▼ to select the required input source

between TV, AV, S-Video, YPbPr, HDMI, and PC.

To confirm the selection, press ENTER.

Volume Adjusting

Press – VOL + to adjust volume.

To turn off the volume, press MUTE.

If you want to restore volume, press MUTE again, or press – VOL + directly.

INFO

To display the current information of the LCD TV: Press INFO, and the current state will be displayed

on the screen. (It shows all or some of the information about Input, Channel, Resolution, Audio Type,

etc., depending on what input source it is in.)

* The picture here shows an example of the INFO screen in a DTV source.

Other manuals for AOC L24H898

Questions and Answers:

Need help?

Do you have a question about the AOC L24H898 and is the answer not in the manual?

General

Power LED	Yes
Pixel pitch	0.2715 x 0.2715 mm
Cable lock slot	No
Display diagonal	23.6 \
Display brightness	300 cd/m²
Display technology	LCD
Native aspect ratio	16:9
Supported video modes	1080p
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	10000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	170 °
Supported graphics resolutions	1920 x 1080 (HD 1080)
Package depth	145 mm
Package width	620 mm
Package height	510 mm
Package weight	9000 g
Certification	FCC, cULus, RoHS, EPA3.0
Tuner type	Analog & digital
Analog signal format system	NTSC
Digital signal format system	ATSC
Audio (L/R) in	1
SCART ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Product color	Black
LED indicators	Stand-by
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	75 W
RMS rated power	10 W

Weight and Dimensions