14
OSD Setting
Basic and simple instruction on the control keys.
RESOLUTION
2560x1440
REFRESH RATE
60 HZ
BRIGHTNESS
80
INPUT SOURCE
DP
GAMING MODE
Off
Game Setting
Picture
Settings
Audio
OSD Setup
Information
Gaming Mode
Shadow Control
Game Color
Adaptive-Sync
Dial Point
Shadow Boost
MBR
MBR Sync
1). Press the
MENU-button
to activate the OSD window.
2). Press or to navigate through the functions. Once the desired function is highlighted, press the
MENU-button
to activate it, press or to navigate through the sub-menu functions. Once the desired
function is highlighted, press
MENU-button
to activate it.
3). Press or to change the settings of the selected function. Press to exit. If you want to adjust any
other function, repeat steps 2-3.
4). OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and
then press power button to turn the monitor on. To unlock the OSD - press and hold the MENU-
button while the monitor is off and then press power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is unable to be adjusted.
2). If the input signal resolution is the native resolution or Adaptive-Sync, then the item “Image Ratio” is
invalid.
3). ECO modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only
one state can exist.
To Next Page
Loading...
Need help?
General
