AOC Q32G3S User Manual

20
Game Setting
ExitExtra
Luminance
Color Setup
Game Mode Off
Shadow Control
Picture Boost
Low Input Lag On
OSD Setup
Game Setting
50
LowBlue Mode
Overdrive Off
Off
Game Color
10
On
AMD FreeSync
Frame Counter
Off
MBR
0
Game Mode
O󰀨 No optimization by Smart image game
FPS
For playing FPS (rst Person Shooters) games.
Improves dark theme black level details.
RTS
For playing RTS (Real Time Strategy). Improves the
image quality.
Racing
For playing Racing games, Provides fastest response
time and high color saturation.
Gamer 1 User’s preference settings saved as Gamer 1.
Gamer 2 User’s preference settings saved as Gamer 2.
Gamer 3 User’s preference settings saved as Gamer 3.
Shadow Control 0-100
Shadow Control Default is 50, then end-user can adjust
from 50 to 100 or 0 to increase contrast for clear picture.
1. If picture is too dark to be saw the detail clearly,
adjusting from 50 to100 for clear picture.
2. If picture is too white to be saw the detail clearly,
adjusting from 50 to0 for clear picture
Low Input Lag On/O󰀨 Turn o󰀨 frame bu󰀨er to decrease input lag
Game Color 0-20
Game Color will provide 0-20 level for adjusting
saturation to get better picture.
Low Blue Mode
O󰀨 / Multimedia /
Internet / O󰀩ce /
Reading /
Decrease blue light wave by controlling color
temperature.
Overdrive
O󰀨
Adjust the response time.
Weak
Medium
Strong
Boost
AMD FreeSync On or O󰀨
Disable or Enable AMD FreeSync Premium(G-Sync
function).
AMD FreeSync Premium(G-Sync function) Run
Reminder: When the AMD FreeSync Premium(G-Sync
function) feature is enabled, there may be ashing in
some game environments.
Frame Counter
O󰀨 / Right-up / Right-
Down / Left-Down /
Left-Up
Display V frequency on the corner selected
MBR 0 ~ 20 Adjust the Motion Blur Reduction.
Note:
1) When “HDR Mode” under “Luminance” is set to “non-o󰀨”, the items “Game Mode”, “Shadow Control”, “Game Color”,
“Low Blue Mode” cannot be adjusted.
2) When “HDR” under “Luminance” is set to “non-o󰀨”, the items “Game Mode”, “Shadow Control”, “Game Color”, “Low
Blue Mode” , “MBR”cannot be adjusted.“Boost” under “Overdrive“ is not available.

AOC Q32G3S Specifications

General

Color gamut	97 %
Pixel pitch	0.273 x 0.273 mm
Screen shape	Flat
Display diagonal	31.5 \
Display technology	-
Native aspect ratio	16:9
Maximum refresh rate	- Hz
NTSC coverage (typical)	106 %
Viewable size, vertical	392.688 mm
sRGB coverage (typical)	120 %
Contrast ratio (dynamic)	80000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.7 million colors
Viewable size, horizontal	698.112 mm
Display brightness (typical)	250 cd/m²
HDMI	Yes
HDCP version	2.2
DisplayPort version	1.4
Input current	1.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	37 W
Tilt angle range	-5 - 23 °
Panel mounting interface	100 x 100 mm
Certification	RCM / MEPS / CE / CB/ FCC / KC/KCC/e-Standby / BSMI
Product color	Black, Red
Front bezel color	Black/Red
Market positioning	Gaming
AMD FreeSync type	FreeSync Premium
NVIDIA G-SYNC type	G-SYNC Compatible

Weight and Dimensions

Depth (with stand)	258.8 mm
Height (with stand)	587.1 mm
Weight (with stand)	7400 g
Depth (without stand)	47.6 mm
Width (without stand)	715.3 mm
Height (without stand)	421.8 mm
Weight (without stand)	5990 g