Apec Water CS-2500P User Manual

Copyright:
This manual is copyrighted by APEC Inc. Under the copyright laws, this manual may
not be reproduced in any form, in whole or part, without the prior written consent of
APEC Inc. Manual print ver. 1.2, 2018 May.
Thank you for choosing APEC Water Filtration Systems.
You now own the finest water filter in America.
Please read and become familiar with instructions and parts needed before pro-
ceeding with the installation.
BEFORE INSTALLATION:
Inspect the system:
Please take the system and all the components out of the box. Inspect the system and
all the connection fittings carefully, make sure nothing is damaged during shipping. If
any part is cracked or broken, please do not proceed with the installation and con-
tact APEC or your distributor for an exchange or diagnosis.
Recommended tools list:
x Adjustable wrench, pliers
x Phillips screwdriver
x Utility knife, or scissors
x Teflon tape
Operating Parameter
x Operating pressure: 90 psi maximum
x Feed water temperature: 35 – 100 degree F (2-37 degree C)
x Do not connect this unit to hot water source
x Install the system in a sheltered environment, avoid exposure to hot and cold
weather or under direct sun light.
General Installation/Operation/Maintenance Requirements
x
Installation needs to comply with state and local laws and regulations.
x System must be installed indoor away from possible environmental damage.
x Do not use with water that is microbiologically unsafe or of unknown quality
without adequate disinfection before or after system. Systems certified for cyst
reduction may be used on disinfected water that may contain filterable cysts.
1
Copyright
:
This manual is copyrighted by APEC Inc. Under the copyright laws, this manual ma
y
not be reproduced in any
f
orm, in whole or part, without the prior written consent o
f
APEC Inc. Manual print ver. 1.2, 2018 May.
Thank
y
ou
f
or choosin
g
APEC Water Filtration S
y
stems.
Y
ou now own the
f
inest water
f
ilter in America.
Please read and become
f
amiliar with instructions and parts needed be
f
ore pro
-
ceeding with the installation.
B
E
FO
RE I
NS
TALLAT
IO
N:
I
nspect the system:
P
lease take the
sy
stem and all the com
po
nents out o
f
the box. In
sp
ect the
sy
stem and
all the connection
f
ittings care
f
ully, make sure nothing is damaged during shipping. I
f
any part is cracked or broken, please do not proceed with the installation and con
-
tact APEC or your distributor
f
or an exchange or diagnosis.
R
eco
mm
e
n
ded
t
oo
l
s
li
s
t:
x
Adjustable wrench, pliers
x
P
hillips screwdrive
r
x
U
tility kni
f
e, or scissors
x
T
eflon tape
T
T
O
perating Parameter
x
Operating pressure: 90 psi maximum
x
F
e
ed water temperature: 35 – 100 degree F (2-37 degree C
)
x
D
o
n
ot
connect this unit to h
ot
water sourc
e
x
I
nstall the system in a sheltered environment, avoid exposure to h
o
t an
d
co
ld
weather or under direct sun light.
G
eneral Installation/O
pe
ration/Maintenance R
eq
uirement
s
x
I
nstallation needs to comply with state and local laws and regulat
i
o
n
s
.
x
System must be installed indoor away
f
rom possible environmental damag
e.
x
D
o not use with water that is microbiologically unsa
f
e or o
f
unknown quality
without adequate disin
f
ection be
f
ore or a
f
ter system. Systems certi
f
ied
f
or cyst
reduction may be used on disin
f
ected water that may contain
f
ilterable cysts.

Apec Water CS-2500P Specifications

General

Brand	Apec Water
Model	CS-2500P
Category	Water Filtration Systems
Language	English