8
DRY-SUIT VALVE OPERATION, CARE AND MAINTENANCE MANUAL
Cleaning and maintenance
The P-Valve must be rinsed and ushed through with clean fresh water after
every dive. This is important to maintain trouble free use and due to bacterial
growth and the potential health implications.
GUARANTEE
As with all Apeks valves, our range of dry-suit valves come with a lifetime
guarantee to the original owner, against defects in materials and workmanship.
This guarantee does not cover damage due to abuse, neglect, improper usage,
lack of maintenance or normal wear and tear.
If after inspection by Apeks, we are satised that the product is defective, the
product will be repaired or replaced free of charge.
SERVICING
It is recommended that all Apeks suit valves are inspected on a yearly basis.
Every two years your valves should be serviced by your local Apeks dealer
or suit manufacturer.
CAUTION: Diving is a potentially hazardous sport. Before using any
diving equipment you should be properly trained in the use of the
equipment by a recognised club or organisation.
All Apeks diving equipment is designed and manufactured in England and is
guaranteed and backed by a rst class after sales service. When your equipment
requires any service or should need repair, you should rst contact your local
Apeks dealer or the suit manufacturer. If dealer service is not available, you
can contact our customer service department directly.
Thank you for purchasing Apeks Dry-suit valves.
To Next Page
Loading...
Need help?
General