APRILIA eSR2 2021 User Manual

10
4. Battery charging and activation
Prior to using the item for the rst time, charge to 100%. Ensure the item, charger, and charging port are dry.
Instructions
- Open the kickstand
- Switch o󰀨 the item
Model Reference picture Instructions
eSR2
eSR2 EVO
- Remove the rubber cover from the charging
socket
- Connect the battery charger to the charging
port and then to the power socket.
- Whe n the item is fully charged, the light on
the charger changes from red (charging) to
green (charging complete).
- After charging, close the rubber cover on the
charging socket
- Unplug the battery charger from the power
socket
eSRZ
- Remove the rubber cover from the charging
socket
- Connect the battery charger to the charging
port and then to the power socket.
- When the item is fully charged, the light on
the charger changes from red (charging) to
green (charging complete).
- Disconnect the battery charger from the
charging port and put back the rubber cover
in the charging socket.
- Unplug the battery charger from the power
socket.

APRILIA eSR2 2021 Specifications

General

Brand	APRILIA
Model	eSR2 2021
Category	Scooter
Language	English