Aqua Computer high flow NEXT User Manual

high flow NEXT
12.3.
12.3.12.3.
12.3. Profile configuration
Profile configurationProfile configuration
Profile configuration
All configuration changes are automatically stored in the currently active profile.
The current configuration can also be stored in any other profile by clicking the
corresponding button.
13.
13.13.
13. System settings high flow NEXT
System settings high flow NEXTSystem settings high flow NEXT
System settings high flow NEXT
Select “System” from the device list below the “high flow NEXT” entry.
13.1.
13.1.13.1.
13.1. Device information
Device informationDevice information
Device information
The details displayed here might be required when you contact our service for sup-
port. You may enter a “Device description” for easier identification, this text will be
displayed in the device list and in the data quick view.
13.2.
13.2.13.2.
13.2. Factory defaults
Factory defaultsFactory defaults
Factory defaults
Click the button “Reset device to factory defaults” in the aquasuite or select the
“Factory defaults” entry from the menu for a complete reset of all settings. You will
have to completely reconfigure the device after resetting it to factory defaults!
13.3.
13.3.13.3.
13.3. Basic RGBpx settings
Basic RGBpx settingsBasic RGBpx settings
Basic RGBpx settings
The RGBpx illumination can be completely disabled and the brightness can be re-
duced using a slider.
13.4.
13.4.13.4.
13.4. USB power supply
USB power supplyUSB power supply
USB power supply
The high flow NEXT is supplied with power through the USB connection. In default
configuration, power consumption is limited to a maximum current of 0.5 Amps.
This value complies with the maximum allowed current according to the USB spec-
ification. If a large number of LED is integrated, the brightness is automatically re-
duced accordingly.
Alternatively, the current can be limited to a higher value of 2 Amps by activating
the check box. Do not use this function unless the connected USB port is explicitly
Do not use this function unless the connected USB port is explicitlyDo not use this function unless the connected USB port is explicitly
Do not use this function unless the connected USB port is explicitly
specified for a current of at least 2 Amps by the manufacturer! If the maximum
specified for a current of at least 2 Amps by the manufacturer! If the maximumspecified for a current of at least 2 Amps by the manufacturer! If the maximum
specified for a current of at least 2 Amps by the manufacturer! If the maximum
permissible current of the USB port is exceeded, permanent damage is possible!
permissible current of the USB port is exceeded, permanent damage is possible!permissible current of the USB port is exceeded, permanent damage is possible!
permissible current of the USB port is exceeded, permanent damage is possible!
Consult the manual of your motherboard/hub for details or contact customer sup-
port of the manufacturer/importer.
13.5.
13.5.13.5.
13.5. aquabus configuration
aquabus configurationaquabus configuration
aquabus configuration
Before connecting multiple high flow NEXT devices simultaneously to an aquaero
5/6 via aquabus, each device has to be configured to a unique aquabus address.
© 2020 Aqua Computer GmbH & Co. KG - 19 -
Gelliehäuser Str. 1, 37130 Gleichen
c
o
m
p
u
t
e
r
a
q
u
a

Aqua Computer high flow NEXT Specifications

General

Brand	Aqua Computer
Model	high flow NEXT
Category	Accessories
Language	English