5
LCD display
Prepare Your Camera for Use
Load Batteries and Memory Card
Open the battery cover and insert the batteries
according to the polarity indicated on the
battery door and close the cover. Optional:
insert an SD memory card (not included).
When the battery power is lo
w, an icon will
appear on the screen.
You will need to select
what kind of battery you are using. If you use
alkaline batteries, you should select 1 and the
battery capacity icon will display half full
indicating that you will not be able to use the
flash but you will still be able to take pictures
until the icon displays empty; If you are using
recha
rgeable batteries, select 2 and the battery
capacity icon will display full indicating that you
can take pictures until the icon shows that the
battery capacity is empt
y.
To Next Page
Loading...
Need help?
General
