EasyManuals Logo
Home>Ariston>Boiler>Type C

Ariston Type C Installation Instructions

Ariston Type C
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
IMPORTANT!
If this situation occurs frequently,
contact an Authorised Service Centre.
so that they may check that the exhaust
fumes are being expelled correctly and
that the area is ventilated properly.
ANTI-FROST DEVICE
The boiler is fitted with a device which,
in the event that the water temperature
goes below 5°C, the three-way diverter
valve switches to domestic hot water
and the burner turns on at minimum
power until the water in the boiler has
reached a temperature of about 50°C.
This device is only activated when the
boiler is operating perfectly and
- the system pressure is sufficient;
- the boiler is powered electrically;
- gas is being distributed.
4. MAINTENANCE
Schedule an annual maintenance
check-up for the boiler with a
competent person.
Correct maintenance always results in
savings in the cost of running the
system.
5. CHANGE OF GAS TYPE
Our boilers are designed to function
either with Natural Gas (methane) or
LPG gas. If you need to changeover
from one gas to the other, one of our
Authorised Service Centres should be
contacted.
16

Table of Contents

Other manuals for Ariston Type C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ariston Type C and is the answer not in the manual?

Ariston Type C Specifications

General IconGeneral
BrandAriston
ModelType C
CategoryBoiler
LanguageEnglish

Related product manuals