EasyManuals Logo
Home>ASROCK>Motherboard>P67 TRANSFORMER

ASROCK P67 TRANSFORMER User Manual

ASROCK P67 TRANSFORMER
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
37
2.16 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.17 Installing Windows
®
7 / 7 64-bit / Vista
TM
/ Vista
TM
64-bit With
RAID Functions
If you want to install Windows
®
7 / 7 64-bit / Vista
TM
/ Vista
TM
64-bit OS on your
SATA / SATAII / SATA3 HDDs with RAID functions, please follow below procedures
according to the OS you install.
RAID mode is not supported under Windows
®
XP / XP 64-bit OS.
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY Advanced screen Storage Con guration.
B. Set the option “SATA Mode” to [RAID].
STEP 2: Use “RAID Installation Guide” to set RAID con guration.
Before you start to con gure the RAID function, you need to check the installation
guide in the Support CD for proper con guration. Please refer to the document in
the Support CD, “Guide to SATA Hard Disks Installation and RAID Con guration”,
which is located in the folder at the following path:
.. \ RAID Installation Guide
STEP 3: Install Windows
®
7 / 7 64-bit / Vista
TM
/ Vista
TM
64-bit OS on your
system.
After the installation of Windows
®
7 / 7 64-bit / Vista
TM
/ Vista
TM
64-bit OS, if you want to
manage RAID functions, you are allowed to use both “RAID Installation Guide” and “Intel
Rapid Storage Information” for RAID con guration. Please refer to the document in the
Support CD, “Guide to SATA Hard Disks Installation and RAID Con guration”, which is lo-
cated in the folder at the following path: .. \ RAID Installation Guide and the document in
the support CD, “Guide to Intel Rapid Storage”, which is located in the folder at the follow-
ing path: .. \ Intel Rapid Storage Information
If you want to use “Intel Rapid Storage” in Windows
®
environment,
please install “SATAII driver” from the Support CD again so that “Intel
Rapid Storage” will be installed to your system as well.

Table of Contents

Other manuals for ASROCK P67 TRANSFORMER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASROCK P67 TRANSFORMER and is the answer not in the manual?

ASROCK P67 TRANSFORMER Specifications

General IconGeneral
BrandASROCK
ModelP67 TRANSFORMER
CategoryMotherboard
LanguageEnglish

Related product manuals