81xC
Page 4 702702A_071206_ENG
6. Maintenance of motor locks
Follow this manual thoroughly to maintain
characteristics of the motor lock.
Do not diverge from this manual without advice
from ASSA.
Warranty fails if product is:
- Wrong installed
- Opened by unauthorised personnel (broken seal) or
if cables/connectors has been cut
- Fitted with accessories or parts not recommended
by ASSA
Maintenance:
Approximately twice a year, a small amount of
designated grease should be applied on latches and
bolts. Highly frequented doors may need maintenance
with shorter intervals.
- Electric parts need NO maintenance
- To maintain desired operation and security level of
installed unit, it is of great importance to check and
adjust the entire door environment:
- Lock case and strike plate
- Lock accessories (Lever handle, thumb turn etc.)
- Hinges, framework and door threshold (sill)
- Door closer
NB!
Never use lubricants containing graphite or
solvent, use designated grease from ASSA only.
If any uncertainty regarding installation, maintenance
or warranty occurs, please contact ASSA or your local
supplier.
ASSA AB
Sales Helpdesk
Phone +46 16 17 70 00 +46 771 640 640
Fax +46 16 17 70 86 +46 16 17 73 72
E-mail info@assa.se helpdesk@assa.se
Address P.O.Box 371
S-631 05 Eskilstuna
Sweden
Web www.assa.se
To Next Page
Loading...
Need help?
General
