EasyManuals Logo
Home>Asus>Motherboard>A55BM-K

Asus A55BM-K User Manual

Asus A55BM-K
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
ASUS A55BM-K
1-1
Product introduction
1
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
Unplug the power cord from the wall socket before touching any component.
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the system
is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down
the system and unplug the power cable before removing or plugging in any motherboard
component. The illustration below shows the location of the onboard LED.
SB_PWR
ON
Standby Power
Powered Off
OFF
A55BM-K
A55BM-K Onboard LED

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus A55BM-K and is the answer not in the manual?

Asus A55BM-K Specifications

General IconGeneral
Non-ECCYes
Memory channelsDual-channel
Memory slots typeDIMM
Supported memory typesDDR3-SDRAM
Maximum internal memory32 GB
Supported memory clock speeds1333, 1600, 1866, 2133, 2400 MHz
Processor socketSocket FM2+
Processor manufacturerAMD
Compatible processor seriesAMD A
USB 2.0 connectors2
Number of COM connectors1
Number of SATA II connectors4
USB 3.2 Gen 1 (3.1 Gen 1) connectors0
RAID levels0, 1, 10, JBOD
Supported storage drive interfacesSATA II, SATA III
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
LAN controllerRealtek 8111G
Ethernet interface typeGigabit Ethernet
Audio chipRealtek ALC887-VD
Component for-
Power source typeATX
Motherboard chipsetAMD A55 FCH
Audio output channels7.1 channels
Motherboard form factormicro ATX
Maximum resolution2560 x 1600 pixels
Maximum graphics card memory2048 MB
BIOS typeUEFI AMI
ACPI version4.0a
BIOS memory size64 Mbit
Cables includedSATA
Weight and Dimensions IconWeight and Dimensions
Depth183 mm
Width226 mm

Related product manuals