Asus A7S333 User Manual

ASUS A7S333 motherboard user guide 7
2.1 Motherboard installation
The A7S333 uses the ATX form factor, measuring 21.9 cm (8.6 in.) x 30.5 cm
(12 in.) - a standard fit for most large chassis.
2.1.1 Placement direction
When installing the motherboard, take care to orient the chassis correctly:
The edge with external ports goes to the rear part of the chassis. Refer to the
image below. It may be more convenient to install major cables, the CPU
and modular components before fixing the motherboard inside the case frame.
2.1.2 Screw holes
Place six (6) screws into the holes indicated by circles to secure the
motherboard to the chassis.
Place this side towards
the rear of the chassis
CAUTION! Do not overtighten the screws! Doing so may damage the
motherboard.
WARNING! Unplug the power cord before installing the motherboard.
Failure to do so may cause you physical injury and damage motherboard
components.

Asus A7S333 Specifications

General

Brand	Asus
Model	A7S333
Category	Motherboard
Language	English