Asus A8N-SLI - Motherboard - ATX User Manual

ASUS A8N-SLIASUS A8N-SLI
ASUS A8N-SLIASUS A8N-SLI
ASUS A8N-SLI
2-132-13
2-132-13
2-13
CapacityCapacity
CapacityCapacity
Capacity
Displays the auto-detected hard disk capacity. This item is not
configurable.
CylinderCylinder
CylinderCylinder
Cylinder
Shows the number of the hard disk cylinders. This item is not configurable.
HeadHead
HeadHead
Head
Shows the number of the hard disk read/write heads. This item is not
configurable.
SectorSector
SectorSector
Sector
Shows the number of sectors per track. This item is not configurable.
PIO ModePIO Mode
PIO ModePIO Mode
PIO Mode
Sets the PIO mode for the IDE device. Configuration options: [Auto]
[Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4]
UDMA ModeUDMA Mode
UDMA ModeUDMA Mode
UDMA Mode
Disables or sets the UDMA mode. Configuration options: [Disabled] [Auto]
Transfer ModeTransfer Mode
Transfer ModeTransfer Mode
Transfer Mode
Shows the Transfer mode. This item is not configurable.
After entering the IDE hard disk drive information into BIOS, use a disk
utility, such as FDISK, to partition and format new IDE hard disk drives.
This is necessary so that you can write or read data from the hard disk.
Make sure to set the partition of the Primary IDE hard disk drives to
active.

Asus A8N-SLI - Motherboard - ATX Specifications

General

Form Factor	ATX
Chipset	NVIDIA nForce4 SLI
Socket	Socket 939
Memory Type	DDR
Memory Slots	4 x DIMM
Max Memory	4 GB
LAN	Gigabit LAN
PS/2 Ports	2
Serial Ports	1
Parallel Port	1
Supported CPUs	AMD Athlon 64, AMD Athlon 64 FX, AMD Athlon 64 X2
Expansion Slots	2 x PCIe x16, 2 x PCIe x1, 3 x PCI
Storage Interfaces	2 x PATA
Audio	Realtek ALC850 8-channel
RAID Support	RAID 0, 1, 0+1
USB Ports	10 (4 on back panel, 6 via headers)