EasyManuals Logo
Home>Asus>Motherboard>A8N-SLI - Motherboard - ATX

Asus A8N-SLI - Motherboard - ATX User Manual

Asus A8N-SLI - Motherboard - ATX
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
2-122-12
2-122-12
2-12
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setup
2.3.52.3.5
2.3.52.3.5
2.3.5
Primary and Secondary IDE Master/SlavePrimary and Secondary IDE Master/Slave
Primary and Secondary IDE Master/SlavePrimary and Secondary IDE Master/Slave
Primary and Secondary IDE Master/Slave
Primary IDE Master
x Auto Acoustic Management
Disabled
Primary IDE Master
[Auto]
Access Mode
[Auto]
Capacity
13579 MB
Cylinder
26310
Head
16
Sector
63
PIO Mode
[Auto]
UDMA Mode
[Auto]
Transfer Mode
UDMA 4
Select Menu
Item Specific Help
Press [Enter] to
select.
The BIOS automatically detects the values opposite the dimmed items
(Capacity, Cylinder, Head, Sector, and Transfer Mode). These values are
not user-configurable. These items show N/A if no IDE device is installed in
the system.
Auto Acoustic Management [Disabled]Auto Acoustic Management [Disabled]
Auto Acoustic Management [Disabled]Auto Acoustic Management [Disabled]
Auto Acoustic Management [Disabled]
This option allows drive noise reduction.
Configuration options: [Disabled] [Minimum] [Medium] [Maximum]
Primary/Secondary IDE Master/Slave [Auto]Primary/Secondary IDE Master/Slave [Auto]
Primary/Secondary IDE Master/Slave [Auto]Primary/Secondary IDE Master/Slave [Auto]
Primary/Secondary IDE Master/Slave [Auto]
Select [Auto] to automatically detect an IDE hard disk drive. If automatic
detection is successful, the BIOS automatically fills in the correct values for
the remaining fields on this sub-menu. If the hard disk was already
formatted on a previous system, the setup BIOS may detect incorrect
parameters. Select [Manual] to manually enter the IDE hard disk drive
parameters. If no drive is installed select [None].
Configuration options: [None] [Auto] [Manual]
Access Mode [Auto]Access Mode [Auto]
Access Mode [Auto]Access Mode [Auto]
Access Mode [Auto]
The default [Auto] allows automatic detection of an IDE hard disk drive.
Select [CHS] for this item if you set the IDE Primary Master/Slave to
[Manual]. Configuration options: [CHS] [LBA] [Large] [Auto]
Before attempting to configure a hard disk drive, make sure you have
the correct configuration information supplied by the drive
manufacturer. Incorrect settings may cause the system to fail to
recognize the installed hard disk.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus A8N-SLI - Motherboard - ATX and is the answer not in the manual?

Asus A8N-SLI - Motherboard - ATX Specifications

General IconGeneral
BrandAsus
ModelA8N-SLI - Motherboard - ATX
CategoryMotherboard
LanguageEnglish

Related product manuals