Installing a Nano SIM card
To install a Nano SIM card:
1. Push the bundled eject pin into the hole on the card slot to
eject the tray out.
2. Insert the Nano SIM card(s) into the card slot(s).
3. Push the tray to close it.
Using NFC
NOTE: NFC is only available in selected regions/countries.
You can use NFC in the following two scenarios:
Reader mode: Your phone reads information from a contactless
card, NFC tag, or other NFC devices.
Place the NFC area of your phone on the contactless card, NFC
tag, or NFC device.
Card Emulation mode: Your phone can be used like a contactless card.
Place the NFC area of your phone on the NFC area of the NFC reader.
NOTES:
• Both Nano SIM card slots support GSM/GPRS/EDGE,
WCDMA/HSPA+/ DC-HSPA+, FDD-LTE, TD-LTE, and 5G NR Sub-6
& mmWave network bands. Both Nano SIM cards can connect to
VoLTE (4G Calling) service. But only one can connect to 5G NR
Sub-6 & mmWave data service at a time.
• Actual network and frequency band usage depends on network deployment
in your area. Contact your telecom carrier if 5G NR Sub-6 & mmWave
support and VoLTE (4G Calling) service are available in your area.
CAUTION!
• Do not use sharp tools or solvent on your device to avoid scratches on it.
• Use only a standard Nano SIM card on your Smartphone.
NA17429_ZS675KW_2SIM_UM_Booklet.indb 3
3
2021/4/15 13:28:27
To Next Page
Loading...
Need help?
General
