Asus P5B User Manual

ASUS P5B 2-33
Q-Connector (system panel)
You can use ASUS Q-Connector to connect / disconnect chassis front panel
cables by only a few steps. Directions below shows how to install ASUS Q-
Connector.
Step2.
Properly install the ASUS Q-Connector to the
System panel connctor.
Step1.
Connect correct front panel to ASUS Q-
Connector rst. You can refer to the marking
on Q-Connector itself to know the detail pin
denition.
Step3.
Front panel functions are enabled.

Asus P5B Specifications

General

ECC	No
Number of memory slots	4
Processor socket	LGA 775 (Socket T)
Processor manufacturer	Intel
Maximum number of SMP processors	1
USB 2.0 connectors	3
S/PDIF out connector	Yes
Number of SATA connectors	5
Special features	- ASUS AI Gear - ASUS AI Nap - ASUS Q-Fan 2 - ASUS Noise Filter - ASUS Q-Connector - ASUS O.C. Profile - ASUS CrashFree BIOS 3 - ASUS EZ Flash 2
Manageability features	WfM 2.0, DMI 2.0, WOL @ PME, WOR @ PME, PXE
Controller interface type	JMicron JMB363
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio output channels	7.1 channels
Motherboard form factor	ATX
Bundled software	ASUS PC Probe II ASUS Update AI Booster
Networking features	Gigabit Ethernet
BIOS memory size	64 Mbit

Weight and Dimensions

Depth	245 mm
Width	305 mm